Pergola
brackets
Steel brackets turn lumber into a pergola without a master carpenter. Here is what each brand actually gives you, and where they all stop.
Bracket systems are the reason a weekend crew can build a pergola that looks like a timber-framer made it. The steel does the joinery. You cut lumber square, drop it into the brackets and bolt it tight. That's the good news.
The catch shows up the day you want to put solar panels on top, or build where the wind blows 130 miles an hour or more. Most bracket kits were made for shade, not for a roof. Here's how the main brands line up.
The brands, side by side
| Brand | Lumber | Finish | Price example | Published ratings | Solid or solar roof? |
|---|---|---|---|---|---|
| Toja Grid (Canada) | 4x4 and 6x6 | Zinc coating, graphite color | 10 x 18 ft double kit, $1,369.99 at Tractor Supply | Roof-load table from an engineer; no wind or uplift numbers | No. Toja says its brackets are not structural brackets for fixed roofs |
| OZCO Ornamental Wood Ties (Texas) | 4x4, 6x6, 8x8 | Hot-dip galvanized, then powder coated | 6 in. post-to-beam plate, 2-pack, $74.74 | None we could find | Not stated |
| Simpson Strong-Tie Outdoor Accents | 4x4, 6x6 | ZMAX galvanized, black powder coat | Sage 8 x 8 ft bundle for 6x6 posts, $1,075 | Tested and code-listed connector loads | Sold as connectors, not a roof system |
| Zen Pergolas (Idaho) | 6x6 | 12-gauge steel | Full bracket set, $1,699 | None published | Not stated |
| PostHugger (USA) | 4x4 | Raw steel, powder coat optional | $168 to $417 a set | None published | Not stated |
| Import kits (VEVOR and Amazon brands) | 4x4, 6x6 | Thin powder-coated steel | 8-piece 6x6 kit, $141.99 | None | No |
Prices and claims as listed by each seller in November 2026. Brand names belong to their owners. We are not affiliated with any of them.
What the table tells you
- Simpson is the only one with tested, code-listed numbers for each connector. If an inspector asks what a joint can hold, Simpson has an answer. It's sold piece by piece, though, not as a carport.
- Toja is the best-known system and the most honest about its limits. It publishes a stamped roof-load table, but it leaves wind, uplift and foundations to "your own engineer," and it says plainly that its standard brackets aren't for fixed roofs.
- OZCO has the best coastal finish on paper: galvanized steel under the powder coat. No load ratings we could find.
- The cheap kits are decoration. Fine for a string-light pergola in a backyard. Not for anything holding panels.
Why solar changes everything
A shade pergola is mostly air. Wind blows through it. Put a roof of panels on top and it becomes a wing. In a hurricane, the wind tries to lift the whole roof off its posts, and every joint, bolt and footing has to hold that pull. That's why North Carolina requires a structural analysis for buildings where the design wind speed is 130 miles an hour or more, which covers the Outer Banks.
No bracket kit we found comes with numbers for that. You can still use one, but you'll be paying an engineer to check the whole structure for your lot before you get a permit.
If you're near salt water
Within about 3,000 feet of the ocean, corrosion eats ordinary hardware fast. Look for hot-dip galvanized steel (heavier than standard G185) under the powder coat, or 316 stainless, and use 316 stainless bolts and screws. Powder coat over thin zinc won't last on the beach. More in hurricane-rated carports.
Tell us your size and your site
Which kit, where it's going, and what you'll park or put under it. We're putting the first kits together now.
We answer every message ourselves.
Straight answers
Can Toja Grid brackets hold solar panels?
Toja says its GRID 30 brackets are not structural brackets and are not intended for fixed roofs. Its main line has a stamped roof-load table, but no wind or uplift ratings, and it leaves foundations and anchorage to your own engineer. A solar roof needs both.
Which pergola brackets are code-listed?
Simpson Strong-Tie Outdoor Accents connectors are tested and code-listed with published allowable loads. They are sold as individual connectors, not as a complete pergola or carport system.
What finish lasts near the ocean?
Hot-dip galvanized steel under a powder coat, or 316 stainless steel, with 316 stainless fasteners. Within about 3,000 feet of the ocean, powder coat over a thin zinc layer corrodes quickly.
Do I need an engineer for a bracket pergola?
For a plain shade pergola, often not. For a solid or solar roof, or anywhere the design wind speed is 130 mph or more, North Carolina requires a structural analysis. That covers the Outer Banks.
What makes your kits different?
The steel plates and bolts are sized by an engineer for a solar roof, and each kit ships with drawings stamped for your lot. You skip paying for a one-off engineering job before you can pull a permit.